RIB Normal Manual De Instrucciones página 34

G G
B B
C
OLUMN WITH ELECTROMAGNETIC BLOCK
Column with electromagnetic block with DEGAUSSER card and
transformer.
1
RELÉ CARD
1 Relé Card to obtain a 1 second contact or supplies for 3 minutes a
40W max light.
H
EATER
Motor heating board for EUROBAR (for prompt start at low
temperatures).
M
AGNETIC LOOP
Self-ajusting metallic mass detector with an inductive coil.
R
ADIO TRANSMITTER MOON
ACG6082 - MOON 433
ACG7026 - MOON 91
C
ODE LEARNING SYSTEM RADIORECEIVERS
code ACG8070
RX91/A quarzata and coupling
RX433/A super eterodyne and coupling
RX433/A 2CH super eterodyne, 2 channel and coupling
F
IT SYNCRO
code ACQ9075
FIT SYNCRO PHOTOCELLS for the wall-installation
The range you can set is 10-20m, 30÷60ft.
You can fit many couples close together thanks to the synchronising
circuit.
Add the SYNCRO TRANSMITTER
for more than 2 photocells couples (up to 4).
COUPLE OF BUILT-IN BOXES FOR THE FIT SYNCRO
S
PARK
code ACQ9097
In order to make the systems mentioned above give the best performances, you
need to install an antenna tuned on the frequency of the radio receiver installed.
N.B. Pay attention to not let the central wire of the cable to came Into
contact with the external copper sheath, since this would prevent the
antenna from working.
Install the antenna vertically and in such a way the remote control can reach it.
SPARK ANTENNA 91
SPARK ANTENNA 433
code ACG9060 SPARK BLINKER WITH IN-BUILT INTERMITTENT CARD
ACG6081 - MOON 433
ACG7025 - MOON 91
code ACG5005
code ACG5055
code ACG5051
code ACG8026
code ACG8028
code ACG8051
code ACG5454
code ACG5452
code ACG7061