USING THE N30
HOW TO CONNECT THE DETACHABLE
CABLES TO THE EARPHONE
The N30 is provided with a 3-button universal remote and microphone cable.
Please follow the instructions below to connect the cables to the earpieces.
You may also need to detach the cable from the earphones to connect optional
components or to replace a damaged cable. The connector type is MMCX.
> Do not use pliers or other tools.
> Grasp the connector and the earphone as close as possible to where they join.
> Pull straight apart—do not twist.
Cable is a snap fit, not threaded.
> Do not pull on the cable or put any
pressure on the earphone nozzle.
> Listen for a click when connecting.
> When reattaching the cable,
match the "L" and "R" markings.
For clear cables and earphones,
match the color dots (Red = Right, Blue = Left).
> Note: If you pull at an angle,
the connector will not detach and
may effect the connector functioning.
( 1 )
Audible click when
properly connected
