Troubleshooting - Philips HR2358/05 Manual Del Usuario

Troubleshooting

This chapter summarizes the most common problems you could encounter with the
appliance. If you are unable to solve the problem with the information below, visit
www.philips.com/support or in the U.S. or Canada only, call 1-866-309-8817 for assistance.
The indicators do not light up.
• The power plug is not connected correctly.
Check whether the power plug is plugged correctly and the outlet is working properly.
After pressing the start/pause button
• The chamber is assembled incorrectly.
The shaping disc, or the front panel is assembled incorrectly.
Make sure you follow the user manual to assemble all parts correctly.
The safety switch is triggered and the appliance suddenly stopped or suddenly
restarts during the processing.
• The front panel knob is loose.
Make sure the front panel is securely assembled.
• Excessive ingredients in the pasta maker.
The maximum amount of flour used for each batch is 500g. If more than 500g is added, reduce the
amount of flour before next batch.
During processing, the appliance stops. There is no alarm sound or flashes.
• The pasta maker has overheated due to long continuous working time.
Disconnect from the power source, and allow the pasta maker to cool down. To better protect the
lifetime of the appliance, the continuous working time should be less than 45 minutes. You can restart
using the appliance after 15 minutes of rest.
When weighing the flour, number of cups shown on the screen changes all the
time.
• You are touching the appliance or the power cord.
When the appliance is weighing the flour, do not touch the appliance or the power cord.
22 English
the appliance sounds but does not work.