Troubleshooting; Wichtige Sicherheitsinformationen - Philips HD7548 Manual De Instrucciones

Preparing for use
1 Put the appliance on a flat and stable surface.
2 Put the plug in an earthed wall socket.
3 Set the on/off switch on the back of the appliance to I (On) and push
excess cord into the opening at the back of the appliance (Fig. 2).
Flushing the appliance
1 Fill the water tank halfway with water (Fig. 3) and put the jug in place.
2 Press the start button (Fig. 4). The light goes on.
3 Let the appliance operate until the water tank is completely empty.The
appliance switches off automatically.
Note: Let the appliance cool down for at least 3 minutes before you start
brewing coffee.
Using the appliance
Brewing coffee
1 Fill the water tank with water (Fig. 5).
-
The graduations on the left are for large cups (120 ml) (Fig. 6).
-
The graduations on the right are for small cups (80 ml).
2 Open the filter holder (Fig. 7).
3 Take a paper filter (type 1x4 or no. 4) and fold the sealed edges to
prevent tearing and folding (Fig. 8).
4 Put the filter in the filter holder (Fig. 9).
Note: Some versions come with a permanent filter. In this case you do
not need a paper filter.
5 Put pre-ground coffee (filter-fine grind) in the filter.
-
For large cups: use one heaped measuring spoon or tablespoon of
ground coffee for each cup (Fig. 10).
-
For small cups: use one level measuring spoon or tablespoon of
ground coffee for each cup.
6 Close the filter holder (Fig. 11).
7 Put the jug in the appliance with the handle pointing straight forward
(Fig. 12). Make sure the lid of the jug is set to
8 Press the start button (Fig. 4). The appliance switches off automatically
after brewing.
Note: To switch off the appliance during brewing, set the on/off switch
on the back of the appliance to O. To continue brewing, set the on/off
switch to I again.
9 When all water has passed through the filter, you can remove the jug
from the appliance (Fig. 13).
10 Remove the filter holder (Fig. 14) and throw away the paper filter (Fig. 15).
If you used the permanent filter, empty and rinse it.
Using the insulated jug
The best way to keep the coffee hot is to rinse the jug with hot water before
brewing and to brew a full jug.
- To pour out coffee, turn the lid to the right (Fig. 16) until the arrow on the
lid points to
Note: Always close the lid after pouring coffee to keep the coffee hot.
- To close the lid, turn it to the left (Fig. 17) until the arrow on the lid points
to .
- To remove the lid, turn it to the left (Fig. 18) until the arrow on the lid
points to .
Cleaning
1 Clean the outside of the coffee maker and the jug with a moist cloth.
2 Detach the filter holder (Fig. 14).
3 Clean the filter holder in hot water with some washing-up liquid.
Note: You can also clean the plastic filter holder (HD7544) in the
dishwasher.The metal filter holder (HD7547, HD7546, HD7548) is not
dishwasher-proof.
4 Clean the inside of the insulated jug with a soft brush, hot water and
some washing-up liquid. Do not clean the insulated jug in the
dishwasher. After cleaning, rinse the insulated jug with fresh hot water.
Note: To remove stubborn brown deposits, fill the jug with hot water and
add a spoonful of soda. Leave the soda in the jug for some time. Then
empty the jug and remove the deposits with a soft brush. Rinse the
insulated jug with fresh hot water.
Descaling
Regular descaling prolongs the lifetime of your coffeemaker and guarantees
optimal brewing results for a long time.
In case of normal use (two full jugs of coffee every day), descale the
appliance:
- 2 or 3 times a year if you use soft water (up to 18dH)
- 4 or 5 times a year if you use hard water (over 18dH)
You can use white vinegar with 4% acetic acid or an appropriate liquid
descaler. If you use a liquid descaler, follow the instructions on the package.
Caution: Never use vinegar with an acetic acid content of 8% or more,
natural vinegar, powder descalers or tablet descalers to descale the
appliance, as this may cause damage.
1 Fill the water tank up to the maximum level with white vinegar (4% acetic
acid).
2 Put a paper filter or the permanent filter in the filter holder to collect
scale particles.
3 Press the start button and let the appliance complete two brewing
cycles. Let the appliance cool down for about 3 minutes between the
brewing cycles.
4 Fill the water tank with fresh cold water and remove the paper filter or
the permanent filter.
5 Let the appliance complete two brewing cycles with fresh cold water to
remove all vinegar or descaler residues. Let the appliance cool down for
about 3 minutes between the brewing cycles.
Note: Do not reuse water that comes out of the appliance for the next
brewing cycle. Always use fresh water.
Note: If necessary, repeat step 5 until the water that comes out of the
appliance no longer tastes or smells of vinegar.
6 Clean the permanent filter (if used), the jug and the filter holder (see
'Cleaning').
Recycling
- This symbol means that this product shall not be disposed of with
normal household waste (2012/19/EU) (Fig. 19).
- Follow your country's rules for the separate collection of electrical and
electronic products. Correct disposal helps prevent negative
consequences for the environment and human health.
Warranty and support
If you need information or support, please visit www.philips.com/support
or read the international warranty leaflet.
Ordering accessories
To buy accessories or spare parts, visit www.shop.philips.com/service or go
to your Philips dealer.

Troubleshooting

This chapter summarizes the most common problems you could encounter
with the appliance. If you are unable to solve the problem with the
information below, visit www.philips.com/support for a list of frequently
asked questions or contact the Consumer Care Center in your country.
Problem
Brewing takes longer
than usual.
The appliances
switches off before
the water tank is
empty.
The coffee is not hot
enough.
The jug cannot be
placed in the
appliance
The filter overflows
when I remove the
jug during brewing.
Deutsch
Einführung
Herzlichen Glückwunsch zu Ihrem Kauf und willkommen bei Philips! Um die
Unterstützung von Philips optimal nutzen zu können, sollten Sie Ihr Produkt
unter www.philips.com/welcome registrieren.
Allgemeine Beschreibung (Abb. 1)
1 START-Taste mit Kontrollleuchte
2 Netzkabel mit Stecker
3 Ein-/Ausschalter
4 Wasserstandsanzeige
5 Wasserbehälter
6 Deckel des Wasserbehälters
7 Abnehmbarer Filterhalter
8 Deckel der isolierten Thermo-Kanne
9 Isolierte Thermo-Kanne

Wichtige Sicherheitsinformationen

Lesen Sie diese wichtigen Informationen vor dem Gebrauch des Geräts
aufmerksam durch, und bewahren Sie sie für eine spätere Verwendung auf.
Gefahr
- Tauchen Sie das Gerät niemals in Wasser
oder andere Flüssigkeiten.
Warnhinweis
- Lassen Sie das Netzkabel nicht über den
Rand der Arbeitsfläche hängen, auf der das
Gerät steht.
.
Solution
Descale the appliance (see 'Descaling').
Descale the appliance (see 'Descaling').
Rinse the jug with hot water before brewing. The
coffee stays warm longer if you brew at least half a
jug.
Make sure that the jug handle points straight
forward.
Do not remove the jug for more than 30 seconds to
prevent this.
.