Siemens KA N Serie Instrucciones De Uso página 37

Fault
Ice cubes are watery.
Ice cubes are evaporating.
The flap on the ice cube
dispenser is not closing properly.
Ice cubes are sticking in the ice
cube tray.
Ice cubes are not the same size
and there is water in the ice cube
container.
Water dispenser is not p
functioning. f ti i
Possible cause
Ice cubes have melted power
failure or the freezer compartment
door was not closed properly.
Ice cubes are preventing the flap
from closing.
Limescale from the water may be
forming in the trays.
The appliance is not level.
Tap turned off.
Water supply is interrupted.
Water pressure too low.
Freezer compartment too warm.
Remedial action
Remove the ice cube maker, empty and rub dry.
Cold air flowing over the ice cubes is causing
shrinkage, particularly if consumption is low.
This is normal.
Remove ice cubes.
Moisten a cloth with vinegar and wipe out the
trays. If limescale is thick, always clean the trays
when cleaning the refrigerator compartment.
Align the appliance with a spirit level and with the
height adjustable rollers or feet (see Installation
instructions).
Turn tap on.
Inform plumber.
Lower temperature in the freezer compartment
(see Setting the temperature").
en
37