Quick Installation - Tripp-Lite SmartPro AGSM7715 El Manual Del Propietario

Quick Installation

Insert one of the supplied input cords*
1
or a user-supplied input cord with
country-specific plug into the UPS
system's IEC-320-C20 AC inlet.
*Included input cordsets include: NEMA 5-20P , Schuko
CEE7/EUI-16P , British BS 1363A and Italian CEI 23-16 to
IEC-320-C19.
Plug the UPS into an outlet on a
2
dedicated circuit.
NOTE! After you plug the UPS into a live AC outlet, the
UPS (in "Standby" mode) will automatically charge its
batteries, but will not supply power to its outlets until it is
turned ON.
Plug your equipment into the UPS.*
3
* Your UPS is designed to support only electronic
equipment. You will overload the UPS if the total VA
ratings for all the equipment you connect exceeds the
UPS's Output Capacity. To find your equipment's VA
ratings, look on their nameplates. If the equipment is
listed in amps, multiply the number of amps by 120 to
determine VA. (Example: 1 amp × 120 = 120 VA). If
you are unsure if you have overloaded the UPS's outlets,
see "OUTPUT LOAD LEVEL" LED description.
Turn the UPS ON.
4
Press and hold the "ON/OFF/STANDBY" button
for one second. The alarm will beep once briefly
after one second has passed. Release the button.
Note: UPS system will function properly upon initial
startup, however, maximum runtime for the unit's battery
will only be accessible after it has been charged for 24
hours.
18-11-091-932968.indb 6
1
2
A
A
4
6
S P
®
MART RO
U P S
12/12/2018 9:58:49 AM