Quick Installation - Tripp-Lite SmartPro 1U El Manual Del Propietario

Mounting
Tower Mounting
Mount all UPS models in an upright, tower position using included hardware. The user must
determine the fitness of hardware and procedures before mounting.
Stand your UPS on its side with the LED/Control
panel at the top. Attach one rack mounting ear
to each side of the UPS using included
A
screws.

Quick Installation

Unplug computer's power cord
1
from both AC outlet and
computer's AC input.
Insert the female plug of
2
computer's cord into UPS's AC
input. Insert the male plug of
computer's cord into AC outlet.*
NOTE! after you plug the UPS into a live AC
outlet, the UPS (in "Standby" mode) will
automatically charge its batteries,** but will not
supply power to its outlets until it is turned ON
(see Step 3 below).
* See Specifications for circuit amperage
requirements. ** The BATTERY CHARGE LED will
be the only LED illuminated.
Find one of the power cords
3
that came with the UPS. Insert
the cord's female plug into
computer's AC input. Insert the
cord's male plug into any of
UPS's female output
receptacles.
19-04-288-9332C7.indb 4
A
1
IEC320-C14 plug shown
2
3
4
A
4/26/2019 11:13:46 AM