Optional Connections - Tripp-Lite SmartPro AGSM7715 El Manual Del Propietario

Optional Connections

These connections are optional. Your UPS will function properly without these
connections.
USB and RS-232 Serial Communications
1
Use the included USB cable (see
cable (see
1b
on your computer to the communication port of
your UPS. Install on your computer the Tripp Lite
PowerAlert software appropriate to your
®
computer's operating system.
EPO Port Connection
2
This optional feature is only for those applications
which require connection to a facility's Emergency
Power Off (EPO) circuit. When the UPS is
connected to this circuit, it enables emergency
shutdown of the UPS inverter.
Using the cable provided, connect the EPO port of
your UPS (see
closed or normally open switch according to the
circuit diagram (see
phone line surge protector; do not connect a phone
line to this port.
18-11-091-932968.indb 7
) or DB9 serial
1a
) to connect the communication port
) to a user-supplied normally
2a
). The EPO port is not a
2b
1a
1b
2a
2b
7
4-5
12/12/2018 9:58:50 AM