SICK GRTE18 Instrucciones De Operación página 6

Commissioning
4 | SICK
Image: K: GRTE18-x24x2
3 The sensors must be connected in a voltage-free state (V
phics [B] must be observed, depending on the type of connection:
– Male connector connection: pin assignment
– Cable: core color
Image: B: GRTE18-x24xx
Image: B: GRTE18-x11xx
Only apply voltage/switch on the power supply (V
been completed. The green LED indicator lights up on the sensor.
Explanations of the connection diagram (Graphic B):
Switching outputs Q and /Q (according to Graphic B):
GRTE18-P (PNP: load -> M)
GRTE18-N (NPN: load -> L+)
4 Align the sensor with the object. Select the position so that the red emitted light beam hits
the center of the object. You must ensure that the optical opening (front screen) of the sen‐
sor is completely clear [E].
Image 6: E
S
8016953.16B5
= 0 V). The information in the gra‐
S
> 0 V) once all electrical connections have
Irrtuemer