Fulgor Milano CO 4512 TC Instrucciones Para El Usuario página 64

5 Turn the door 180°.
GB GB
6 Secure the door in its new position using the 4 screws removed previously.
NOTE: Make sure that the oven door is perfectly parallel with the front panel. If it is not, adjust it by
means of the screws you have just inserted.
7 Fix the oven in the oven recess using the 4 screws
and the plastic spacers provided.
Replacing the oven lamp
IMPORTANT: disconnect the appliance from the power supply line to avoid electrical shocks!
The oven lamp must have precise characteristics:
a) Structure suitable for high temperatures (up to 300 °C);
b) Power supply: see the V/Hz value on the serial number plate;
c) Power 25W;
d) Type G9 connector.
- To avoid damage, spread a tea towel for pots and pans inside the oven;
64 64