Before Use; Inserting/Replacing The Soldering Tip; Initial Operation; Switching On And Off - Parkside PLSD 48 A1 Traducción Del Manual De Instrucciones Original

Before use

Inserting/replacing the soldering tip

CAUTION! RISK OF BURNS!
► Never heat the soldering iron
■ The soldering tip
is switched off and the soldering tip
■ The soldering tip
replaced quickly and easily on the soldering iron
♦ Screw out the soldering tip
♦ Screw in the soldering tip

Initial operation

Switching on and off

Switching on:
♦ Plug the mains plug into an appropriate wall socket and press
the ON/OFF switch
■ The last preset temperature (300°C in initial operation) is shown
for 3 seconds on the LC display
After that time, the LC display
ture .
NOTE
► Before using the soldering station for the first time and also
before using a new soldering tip, the soldering tip
tinned .
PLSD 48 A1
without a soldering tip
may only be removed when the appliance
has a screw thread and it can therefore be
in counter-clockwise direction .
in clockwise direction .
to position "I" .
.
shows the current actual tempera-
has cooled down .
.
must be
GB │ IE
.
│
25 ■