SICK ZSE18 Instrucciones De Operación página 12

7
COMMISSIONING
12
Figure 5: Alignment
2 Sensing range
Observe the application conditions: Adjust the distance between the sender and the
receiver according to the corresponding diagram [see
(x = sensing range, y = operating reserve).
When mounting through beam photoelectric sensors adjacent to each other, alternate the
sender (ZSO18) and receiver (ZEO18) arrangement every other pair. Also ensure that there
is sufficient distance between pairs based on the sender (ZSO18) light spot diameter. By
doing this, mutual interference can be prevented [see
Use table 2 to check the function. If the switching output fails to behave in accordance with
table 2, check the application conditions.
Operating reserve
1.000
100
10
1
0 5
(16.4)
Figure 6: Characteristic curve, ZSE18-xxxxx3
figure 6
figure
10 15 20
(32.81) (49.21) (65.62)
Distance in m (feet)
and see figure 7, page 13]
2].
8021945 | SICK
Subject to change without notice