General Safety Notes; Notes On Ul Approval; Intended Use; Operating And Status Indicators - SICK ZSE18 Instrucciones De Operación

1

General safety notes

2

Notes on UL approval

3

Intended use

4

Operating and status indicators

5

Mounting

8021945 | SICK
Subject to change without notice
Read the operating instructions before commissioning.
■
■
Connection, mounting, and configuration may only be performed by trained
specialists.
■
NO
2006/42/EG
Not a safety component in accordance with the EU Machinery Directive.
SAFETY
■
When commissioning, protect the device from moisture and contamination.
These operating instructions contain information required during the life cycle of
■
the sensor.
Blue housing types (Zxx18-1xxxxx ... Zxx18-9xxxxx):
• Type 1 enclosure
Clear housing types (Zxx18-Axxxxx ... Zxx18-Jxxxxx):
• Type 1 enclosure
• Class 2 power supply required
The ZSE18 is an opto-electronic through-beam photoelectric sensor (referred to as
"sensor" in the following) for the optical, non-contact detection of objects, animals, and
persons. A sender (ZSO18) and a receiver (ZEO18) are required for operation. If the
product is used for any other purpose or modified in any way, any warranty claim
against SICK AG shall become void.
1
2
Figure 1: Status indicators
LED indicator (green): power
1
LED indicator (orange): light received
2
Mount sensors (sender and receiver) using suitable mounting brackets (see the SICK
range of accessories). Align the sender and receiver with each other.
GENERAL SAFETY NOTES
1
5