Environmental Instructions; Accessories And Spare Parts; Ec Declaration Of Conformity - Würth MKS 2400 Traducción Del Manual De Instrucciones De Servicio Original

Warranty
We provide a warranty for this Würth device from
the date of purchase and in accordance with the
legal/country-specific regulations (proof of purchase
through invoice or delivery note).
Damage that has occurred will be corrected either
by replacement or by repair. Damage caused by
improper handling is not covered by the warranty.
Claims under warranty can only be accepted if
the device is returned fully assembled to a Würth
agency, your Würth sales representative or an
authorised Würth customer service workshop.
Subject to technical changes without prior notice.
We accept no liability for printing errors.

Accessories and spare parts

If in spite of careful manufacturing and test proce-
dures, the device becomes faulty, a repair by Würth
masterService should be arranged.
With any enquiries or spare parts orders, always
quote the article number as given on the device type
plate.
The latest spare parts list for the device is available
online at http://www.wuerth.com/partsmanager.
Alternatively, contact your local Würth agency for a
hardcopy.
18

Environmental Instructions

Do not throw the device away with
normal domestic waste. Dispose of
the device via an approved waste
disposal company or via your local
authority waste disposal facility.
Observe the currently valid regula-
tions. In case of doubt, contact your
waste disposal facility. Dispose of all packaging in
an environmentally compatible manner.

EC Declaration of Conformity

We declare under our sole responsibility that this
product conforms to the following standards and
directives:
Standards
• EN 953: 1997 + A1:2009
• EN ISO 12100: 2010
• EN 55014-1: 2006 + A1:2009
• EN 55014-2: 1997 + A1:2001 + A2:2008
• EN 61029-1: 2010
in accordance with the regulations stipulated in the
directives:
EC Directive
• 2006/42/EC
• 2014/35/EC
• 2014/30/EC
Technical documentation at:
Adolf Würth GmbH & Co. KG, Abt. PCM
Reinhold-Würth-Straße 12 – 17,
74653 Künzelsau, Germany
F. Wolpert
Head of Product Man-
agement
Authorised Signatory
Künzelsau: 17/10/2017
Dr.-Ing. S. Beichter
Head of Quality,
Authorised Signatory