Safety Notes; Correct Use - SICK GTE6-Line Instrucciones De Operación

1

Safety notes

2

Correct use

3 Commissioning
8015312 | SICK
Subject to change without notice
Photoelectric proximity sensor
Operating instructions
Read the operating instructions before commissioning.
■
Connection, mounting, and setting may only be performed by trained specialists.
■
Not a safety component in accordance with the EU Machinery Directive.
■
UL: Only for use in applications in accordance with NFPA 79. These devices shall
■
be protected by a 1 A fuse suitable for 30 V DC. Adapters listed by UL with connec‐
tion cables are available. Enclosure type 1.
When commissioning, protect the device from moisture and contamination.
■
These operating instructions contain information required during the life cycle of
■
the sensor.
The GTE6-Line is an opto-electronic photoelectric proximity sensor (referred to as "sen‐
sor" in the following) for the optical, non-contact detection of objects, animals, and per‐
sons. If the product is used for any other purpose or modified in any way, any warranty
claim against SICK AG shall become void.
Energetic photoelectric proximity sensor.
1
2
9.7
(0.38)
Image: A
1 Check the application conditions: Adjust the sensing range and the remission capa‐
bility of the object according to the corresponding diagram [H] (x = sensing range, y
= operating reserve).
During this process, an object can only be detected in front of a background if the
remission capability of the object is significantly higher than that of the background
or if the distance between the object and the background is sufficiently long.
21
(0.83)
0.5
(0.02)
3
3
3
(0.12)
(0.72)
4 5
6
L D
18.3 12
(0.47)
1