General Safety Instructions; General Safety Information For Power Tools - Echo CS 1800 Instrucciones De Manejo

Electric Chainsaw
Introduction to the Operating Instructions
These Operating Instructions are intended to facilitate your becoming acquainted with the machine and using it in
accordance with the regulations. The Operating Instructions contain important information on how to use the machine
safely, correctly and economically. Observing this information will help increase the reliability and working life of the
machine. The Operating Instructions must always be at hand when the machine is being used.
They must be read and observed by every person dealing with the machine, whether operating, servicing or trans-
porting it.
In addition to the Operating Instructions and the applicable rules of the prevention of accidents valid in the country
of use and on site, the generally recognised rules on working safely and correctly must be observed as well as the
accident prevention rules of the relevant professional associations.
Technical Data
The devices are manufactured in accordance with the provisions of DIN EN 60745-2-13 and fully comply with the
provisions of the German Product Safety Act.
Model
Rated Voltage
Nominal Frequency
Fuse (time lag)
Rated Output
Nominal current
Guide Bar mm
Cutting length
Speed
Weight
Oil
All models with automatic chain lubrication and mechanical chain brake and rundown brake.
The type designation of the chain you will find on the type plate.
Class of Protection:
Interference Suppression:
Noise emission information in accordance with the German Product Safety Act (ProdSG) and the EC Machine Direc-
tive
Noise emission values EN-60745-2-13:
Vibration values in accordance with EN 60745-2-13: Weighted acceleration handle
Attention: This chain saw is only intended for cutting wood !

General safety instructions

Noise emission information in accordance with the Ger-
man Product Safety Act (ProdSG) and the EC Machine
Directive: the noise pressure level at the place of work
can exceed 80 dB(A). In such cases the operator will
require noise protection (e.g. wearing of ear protectors).
Attention: Noise protection! Please observe the lo-
cal regulations when operating your device.
KSE 2400 (CS 1800)
V~ 230
Hz 50
A 16
W 2400
A 11,1
350
mm 340
m/sec ca. 12
kg 4,3
ml 200
II/ DIN-EN 60745-1
according to EN-55014
2400 (CS 2400)
230
50
16
2400
11,1
400
380
ca. 12
4,4
200
Sound Pressure Level L pA

General safety information for power tools

WARNING: Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future refer-
ence.
GB-1
Translation of the original Operating Instructions
ENGLISH
90 dB (A) [K=3,0 dB (A)]
2
max. 6,0 m/s [K=1,5 m/s ]
2