Tabla de contenido
Idiomas disponibles
Idiomas disponibles
4. Prepare the four support mounting hexagon bolts
as in the figure, and attach them to support
from the rear.
Affix them securely from the front with flanged
cap nuts .
•
The bolt and nuts should be securely tightened to
the torque given below.
(12~14 N•m)
3. Preparation and installation of plasma display
Caution
•
The plasma display is heavy so use a device (machine) that will
enable the plasma display to be lowered in place.
•
The controls of the plasma display panel are located on the right
side panel so ensure that they are not bumped into or knocked
during the installation process.
•
Make sure that the stand hooks are firmly secured.
1. To lift the plasma display, connect the suspension device's
hook to the eye bolt in the center of the plasma display.
2.
Join the stand hooks to the 4 notches
on the display mounting fixture and let
them drop in until they stop.
Preparation of hexagon bolts
Spring washers
Flat washers
Flanged cap
nuts
Front
Stand hooks
Support mounting hexagon bolts
Supports
Support mounting
hexagon bolts
Stand hooks
Notches
19
Tabla de contenido
