STEP 11 - SENSOR PAD SETTINGS
These functions allow you to configure
all your Sensor Pad settings.
12.1 SENSOR PAD ACTIVATION:
This function allows you to turn ON/OFF
Sensor Pad function.
12.2 SENSITIVITY LEVEL:
This function allows you to adjust the
Sensor Pad sensitivity level (1 being the
least sensitive and 5 the most).
12.3 MOVEMENT BAR:
This function allows you to display your
baby's movements on the left of the screen.
12.4 TIC SOUND FOR MOVEMENT:
This function allows you to hear
a 'TIC' sound when Sensor Pad function
is activated.
STEP 12 - TESTING AND GETTING TO KNOW YOUR SENSOR PAD
TO TEST SENSOR PAD:
1
MOTION ALARM
• Alarm activates when no movement is detected by Sensor Pad for 20 seconds.
• Both the Mobile Device and the Camera speakers will emit loud warning sound.
• Motion Alarm icon will show on the your device screen.
IMPORTANT
If the movement alarm sounds please note the following:
Smartphone Alarm: Will NOT sound but you will still receive
Push Notification and the Nursery camera alarm will sound.
20
All manuals and user guides at all-guides.com
2
12.1
12.2
12.3
12.4
NOTE:
Sensor Pad settings are only available
if Sensor Pad is correctly plugged
into the Camera.
IMPORTANT
• The Sensor Pad is not designed for
use with adults, children or infants
older than 24 months.
• Once you have finished using the
Sensor Pad, please remove it from
the baby's crib and store it away.
1) Move your hand lightly on the mattress.
2) Remove your hand from themattress
and make sure you step away from the
crib not to cause any vibrations.
3) After 15 seconds you will hear a 'TIC'
pre-alarm sound, and 5 seconds later
the Movement Alarm will sound.
NOTE:
Both the mobile device and camera
will emit the alarm sound.