3)
Safety
3.1)
Danger levels of warnings
Meaning of the signal words used here:
S
M
IGNAL WORD
DANGER
I
MMEDIATE DANGER OF DEATH OR SERIOUS INJURY
WARNING
P
CAUTION
P
ATTENTION
P
NOTE
A
3.2)
Criteria relating to staff
All work on the side approach mechanism may only be performed by specially trained staff. Pre-
requisites:
Mechanics: completed qualification in industrial mechanics
Electrical engineering: completed qualification in electrical engineering
For all other sectors (e.g., transport, test operation, storage and disposal): knowledge of these
operating instructions of these operating instructions
In general:
The clothing worn by the person operating or maintaining the the side approach mechanism
the pneumatic test probe must not present any hazards (no jewellery, no loose-fitting garments
such as ties, scarves, etc., long hair must be tied back).
The persons operating or maintaining the side approach mechanism the pneumatic contact
test probe may not be under the influence of medication, drugs or alcohol.
3.3)
Liability for misuse
INGUN assumes no liability for damages caused by non-compliance with the operating instruc-
tions, or lack of testing to ensure the technically perfect and safe state of the side approach mech-
anism.
3.4)
Safety instructions
CAUTION
R
ISK OF PIERCING OR PUNCTURE INJURY
Mechanical hazard due to sharp test probes!
Maintenance work must be carried out by trained specialists only.
The installation of test probes must be performed using the designated installation tools
only.
CAUTION
D
ANGER OF CRUSHING OR SHEARING INJURY
Mechanical risk of injury from pneumatically operated parts!
Pneumatic drives must only be operated when the housing is fully closed.
23
/ C
EANING
ONSEQUENCES IF DISREGARDED
OSSIBLE RISK OF DEATH OR SERIOUS INJURY
OSSIBLE RISK OF MODERATE OR MINOR INJURY
OSSIBLE DAMAGE TO PROPERTY
DDITIONAL INFORMATION AND USEFUL TIPS
©
INGUN: Subject to technical changes without notice. E&OE.
!
!
English