DAB KDN 32-125.1 Instrucciones Para La Instalación Y El Mantenimiento página 27

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 58
CONTENTS
1.
GENERAL
1.1.
2.
3.
4.
5.
5.1.
5.2.
5.3.
6.
6.1.
6.2.
6.3
6.4
6.5
6.6
6.6.1
6.6.2
6.6.3
7.
8.
9.
10.
11.
12.
12.1
12.2
12.2.1
12.3
12.3.1
12.3.2
12.4.
12.4.1
12.4.2
12.4.3
13.
14.
1.
GENERAL
Read this documentation carefully before installation. It contains fundamental instructions to help
you get to know the pump so that you can make the best use of its various possibilities of
application. Observing these indications will ensure long life of the pump parts and avoid risks. The
manual must always be kept within reach in the place where the machine is to be used.
Installation and functioning must comply with the safety regulations in force in the country in which the
product is installed. The entire operation must be carried out in a workmanlike manner, exclusively by
skilled personnel (paragraph 6.1), in possession of the technical qualifications indicated by the standards
in force. Failure to comply with the safety regulations not only causes risk to personal safety and damage
to the equipment, but invalidates every right to assistance under guarantee.
The pump may be installed in either horizontal or vertical position, as long as the motor is always
above the pump.
The supply may be made in one of the following configurations:
 KDN Standardized Pumps with a bare axis (without motor);
 KDN Standardized Electropumps on a base complete with electric motor (to be chosen to suit the
fluid that is to be pumped), coupling, base and coupling cover, all preassembled.
ENGLISH
24
page
24
25
25
25
25
25
25
26
26
26
26
26
26
26
26
27
27
27
27
27
29
29
29
30
30
30
30
30
30
30
31
31
31
31
31
31
32
Tabla de contenido
loading

Tabla de contenido