Kvm Switching Operation Reference - Tripp-Lite B004-VUA2-K-R Manual Del Propietário

KVM Switching Operation Reference

Switching PCs Using Operation Menu
Right-click the KVM Switcher icon to evoke
the operation menu, then select whichever
PC that is available for switching. Once you
select a PC channel, it will immediately
switch to that PC.
Note: The unconnected port(s) or the active port will
be grayed-out and hence non-selectable.
Switching PCs Using Keyboard Hot Key
Hit the hot key using your current hot key definition:
Hot key sequence = Ctrl - Alt - [command key]*
* The factory default hot key setting is Ctrl + Alt + 1/2 for PC 1/2. You can also use ScrLk + ScrLk to
switch PC.
Start Auto-Scan
Right-click the KVM Switching icon to evoke the operation menu, then select Start
Auto-Scan to activate auto-scanning.
Stop Auto-Scan
While auto-scanning, right-click the KVM Switching icon to evoke the operation menu,
then select Stop Auto-Scan to de-activate auto-scanning. Or you can press any of the
manual buttons to stop Auto-scan.
Auto-Scan Period
Select the Auto-scan period from 10 ~ 60 seconds with an increment of 5 seconds.
The Auto-scan period is the time your KVM Switch will wait before switching to next PC.
KVM Switcher Configuration
Right-click the KVM Switcher icon and select Settings or double-click the icon to bring
up the configuration dialog box.
Define Hot Key Commands
You can specify the command key you desire by typing it in. For example, you can
specify the hot key for switching to PC 1 as CTRL - ALT - A by typing an A (not case-
sensitive) in the editable field.
17-10-466-932714.indb 5
Windows
5
Mac OS
11/14/2017 3:02:16 PM