Device Elements; Proper Use; Technical Data - Würth Master DIGA CS-2 POWER Traducción Del Manual De Instrucciones De Servicio Original

Symbols in this instruction
manual
Danger
For an immediate threat of danger
which causes serious injuries or death.
Warning
For a possibly dangerous situation
which may cause serious injuries or
death.
Caution
For a possibly dangerous situation which may cause
minor injuries or damage to property.

Device elements

Before using the device, the operator must familiar-
ise himself with all device features and the applica-
ble safety instructions.
Overview (fig. I)
1 Intake opening/cap with filter pad
2 Cover / intake slots for gas cartridge
3 Actuator
4 Battery's's charging state/maintenance indica-
tion
5 Battery unlocking button
6 Battery
7 Belt retaining bracket
8 Magazine lock
9 Magazine foot
10 Magazine
11 Follower
12 Release lever for follower
13 Sleeve
14 Exhaust gas opening

Proper use

This device is intended to be used for firing pins
(fasteners) into concrete, full block calcium silicate,
full bricks and steel using the original Würth system
parts.
Any other use than that described shall be deemed
to be improper use.
The user is liable for damage due to improper use.
16

Technical data

Prod. no.
Firing power (max.)
Pin length x pin - Ø (max.)
Magazine capacity
Dimensions (height x length
x width)
Weight
Gas cartridge item no. 864 900 500
Capacity
Substance
Hazard class
Max. ambient temperature 50 °C
Energy reserve
Mains adapter
Input voltage / current
Output voltage / current
Charging period
- Discharging the battery
- first start-up
Battery
Nominal voltage
Capacity
Ambient temperature
Energy reserve with fully
charged battery
Method of functioning
The device has a combustion drive with explosive
gas mix. By ignition of the gas mix, the piston is actu-
ated and drives in the pin. Exhaust gas and noise
emissions, which may be hazardous to health, are
generated during the combustion process. Adhere to
the stipulated safety instructions.
0864 90 2
1000/h
40 x 3.7 mm
42 pins / 22 pins
365 x 435 x 124 mm
3.7 kg
80 ml
- Propylene
- But-1-ene
2.1 UN 1965
approx. 1100
firing processes
100 - 240 V AC/
0.4 A
10 V /0.8 A
120 min
24 h
NiMH
6 V DC
1.5 Ah
5 - 50 °C
approx. 3000
firing processes