Noise/Vibration Information; Battery Charging; Removing The Battery; Ec Declaration Of Conformity - Würth EMS 12-A Manual Del Usuario

OBJ_BUCH-1106-003.book Page 15 Thursday, October 27, 2016 2:00 PM

Noise/Vibration Information

Sound emission values determined according to
EN 60745-2-4.
Typically the A-weighted noise levels of the product are:
Sound pressure level 84 dB(A); Sound power level 95 dB(A).
Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 60745-2-4:
2
Sanding: a =2.6 m/s , K=1.5 m/s
h
Sawing with plunge cut saw blade: a
2
K=1.5 m/s ,
Sawing with segment saw blade: a
2
K=1.8 m/s ,
2
Scraping: a =17.3 m/s , K=1.6 m/s
h
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with
another. It may be used for a preliminary assessment of expo-
sure.
The declared vibration emission level represents the main
applications of the tool. However if the tool is used for differ-
ent applications, with different accessories or insertion tools or
is poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working
period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work pat-
terns.
EC-Declaration of Conformity
We declare under our sole responsibility that the product
described under "Tool Specifications" complies with all
applicable provisions of the directives 2011/65/EU,
2014/30/EU, 2006/42/EC including their amendments
and is in conformity with the following standards:
EN 60745-1:2009+A11:2010,
EN 60745-2-4:2009+A11:2011,
EN 55014-1:2006+A1:2009+A2:2011,
EN 55014-2:1997+A1:2001+A2:2008,
EN 50581:2012.
Technical file (2006/42/EC) at:
Adolf Würth GmbH & Co. KG, Abt. PPT,
Reinhold-Würth-Straße 12–17
74653 Künzelsau, Germany
Frank Wolpert
General Manager
2
,
Künzelsau: 01.11.2016
2
=13.1 m/s ,
h
2
=12.2 m/s ,
h
2
. Note: The battery supplied is partially charged. To ensure
full capacity of the battery, completely charge the battery in
the battery charger before using your power tool for the first
time.
The lithium-ion battery can be charged at any time without
reducing its service life. Interrupting the charging procedure
does not damage the battery.

Removing the battery

To remove the battery 2, press the unlocking buttons 1 and
pull the battery out of the machine to the rear. Do not exert
any force.
Battery Charge-control Indication
The three green LEDs of the battery charge-control indicator 4
indicate the charge condition of the battery 2. For safety rea-
sons, it is only possible to check the status of the charge con-
dition when the machine is at a standstill.
To indicate the charge condition, press and hold button 3 of
the switched off machine.
LED
Continuous lighting 3 x green
Continuous lighting 2 x green
Continuous lighting 1 x green
Flashing light 1 x green
Dr.-Ing. Siegfried Beichter
General Manager

Battery Charging

Capacity
2/3
1/3
<1/3
Reserve
15