Paging The Parent Unit; Battery Status Light; Functions And Feedback On The Parent Unit; Talk Function - Philips AVENT SCD506 Manual De Instrucciones

Paging the parent unit

If you have lost the parent unit, you can use the PAGE button on your baby unit to locate the parent
unit. This function only works when the parent unit is switched on.
1 Press the PAGE button on the baby unit (Fig. 17). The parent unit produces a paging alert tone.
2 To stop the paging alert tone, press the PAGE button on the baby unit again or press any button
on the parent unit. The paging alert tone stops automatically after 2 minutes.

Battery status light

The battery status light is solid green when the baby unit is operating on battery power and the
batteries contain enough energy.
The battery status light flashes red quickly when the batteries run low while the baby unit is operating
on battery power (Fig. 18).
Note: The battery status light is off when the baby unit is powered by the adapter.
Replace the batteries when they run low.

Functions and feedback on the parent unit

Volume
There are five volume levels and a 'volume off' setting.
Setting the volume level
1 Press the + button or the - button once.
The sound level lights show the current volume (Fig. 19).
2 Press the + button to increase the volume or press the - button to decrease the volume.
3 If you do not press a button for more than 3 seconds, the sound level lights go out and the setting
is saved.
Volume off
Below the lowest volume setting, there is a 'volume off' setting.
1 Press the + button or the - button once.
The sound level lights show the current volume.
2 Press and hold the - button for more than 3 seconds to set the volume to off.
Note: The sound level lights always show that the baby produces sounds, even if the volume is set to
off.

Talk function

1 If you want to comfort your baby, press the TALK button on the parent unit and talk clearly into the
microphone on the front from a distance of 15-30cm (0.5-1ft) (Fig. 20).
The 'link' light starts flashing green.
Note: If you have set the volume for the lullaby higher on the baby unit, the sound will also be
louder when you use the talk function on the parent unit.
2 Release the TALK button when you have finished talking.
English
11