Using The Artisan™ Toasters; Checking The Toaster Progress; Canceling The Toaster Cycle - KitchenAid ARTISAN 5KTT890 Manual De Instrucciones

Using the Artisan™ Toasters
5. Push the lift lever down until the
bread is lowered as far as possible,
then turn the "O/I" Switch
momentarily to the "I" position.
The switch will spring back to the
middle position and the function
light will glow, indicating the
toasting cycle has started.
NOTE: Toaster will automatically shut
off if the "O/I" Switch is held in the
"I" position more than 15 seconds.
6. When the toasting cycle is
complete, a tone will sound and
the function light will stop
glowing. The toast will remain in
the warm toasting cavity until the
lift lever is raised.

Checking the Toaster Progress:

To check the progress of your toast
during a toasting cycle, raise the
manual lift lever. Raising the lift lever
will not cancel the toasting cycle,
enabling you to simply lower the
bread if additional browning is
required. If you remove the bread
before a toasting cycle is complete,
don't forget to cancel the cycle by
turning the "O/I" Switch momentarily
to the "O" position. If you forget to
cancel the cycle, the toaster will
automatically shut off at the end of
the cycle time.
NOTE: Operating the toaster without
bread will not harm the toaster.

Canceling the Toaster Cycle:

To cancel the toasting cycle at
anytime, turn the "O/I" Switch
momentarily to the "O" position. The
function light will stop glowing and
the toasting cycle will end.
7