8
PREPARE TO INSTALL THE RANGE
INSTALLATION DRAWINGS (LDE Series only)
NOTE
SAVE FOR THE USE OF THE LOCAL ELECTRICAL
INSPECTOR.
To install range refer to the following Figure 1.
CAUTION
- Discoloration, delamination or melting may
occur.
- This range has been designed to comply
with the maximum allowable wood cabinet
temperatures of
A = 30"(76.2 cm) For U.S.A
= 30"(76.2 cm) ~ 31"(78.7 cm) For CANADA
* 30"(76.2 cm) minimum clearance between the top of the cooking surface and the bottom of an unprotected wood
or metal cabinet; or 24"(60.9 cm) minimum when bottom of wood or metal cabinet is protected by not less than
/
"(6.4 cm) flame retardant millboard covered with not less than no. 28 MSG sheet steel, 0.015"(0.381 mm) stainless
1
4
steel, 0.024"(0.610 mm) aluminum or 0.020"(0.508 mm) copper.
** 15"(38.1 cm) minimum between countertop and adjacent cabinet bottom.
Cabinet
opening
Wall
Center
Cabinet
6"
6"
(15.2cm)
(15.2cm)
4"
(10cm)
4"
(10cm)
WARNING
- Failure to do so can result in back or other injury.
- Failure to do so can result in serious damage to
the door of the range.
CAUTION
- The risk of burns or re by reaching over the
heated surface elements can be reduced.
2.5"(6.3cm)
2.5"(6.3cm)
5"
6"
(13cm)
(15.2cm)
2.5"
(6.3cm)