Product Care; Supplied Accessories - FujiFilm MK Serie Manual Del Propietário

Product Care

• When using a lens hood, do not pick up or hold the camera using only the hood.
• Use a blower to remove dust and lint from the glass surfaces of the lens or fi lter. To remove smudges
and fi ngerprints, apply a small amount of lens cleaner to a soft, clean cotton cloth or lens-cleaning
tissue and clean from the center outwards using a circular motion, taking care not to leave smears or
touch the glass with your fi ngers.
• Never use organic solvents such as paint thinner or benzene to clean the lens.
• Attach the front and rear caps when the lens is not in use.
• Store the lens and fi lter in cool, dry locations to prevent mold and rust. Do not store in direct sunlight
or with naphtha or camphor moth balls.
• Keep the lens dry. Rusting can cause irreparable damage. Wipe off rain and water droplets.
• Leaving the lens near a heater or in other extremely hot locations could cause damage or warping.
• There may be a case that the glasses of the lens mist when the lens is carried from a cool place to a
place of high temperature and high humidity. To avoid a mist on the glasses, before moving the lens,
let the lens adjust to the ambient temperature of the place where the lens will be used.
Lens Features
This lens is for movies. It features a fully manual E mount no electronic control and no exchange of
data between the camera and lens.

Supplied Accessories

• Front lens cap (Part No. BU00006892-1**)
• Rear lens cap (Part No. BB00038220-1**)
• Lens hood (MK 18–55 mm: Part No. BU00007494-1**/MK 50–135 mm: Part No. BU00007584-1**)
• Lens hood cap (Part No. 057B00742627*)
• Wrapping cloth (Part No. FZ00010454-1**)
• Zoom lever (Part No. 047B00160740*)
• Bridge rod ×1 (25.5 mm/M3, for support rod attachment, Part No. BB00038388-1**)
• Extension rod ×2 (17.95 mm, for support rod attachment, Part No. BB00035717-1**)
Q
The part numbers in parentheses are required when ordering spares or replacements.
EN-2
ENGLISH