Tool Specifications; Use As Intended; Display Symbols - Würth Master WDM 61 Instrucciones Para El Manejo

WDM 61.book Seite 14 Mittwoch, 28. Mai 2008 8:08 08

Tool Specifications

B
Laser distance meter
The symbols on the device have the following meaning:
Laser irradiation
Do not look into the beam
Laser class 2
according to IEC 60825-1: 2007
Max. power output:
Wavelength:
Order number
Measuring range
Measuring accuracy, typ.
Smallest display unit
Laser point Ø in 10/50 m
Automatic shut-off
Illumination/laser/device
Automatic release/timer
Batteries
Battery operating life
Protection class (IEC60529)
Storage temperature
Operating temperature
Weight, approx.
* For the following situations, using a target plate is recom-
mended already for closer working ranges:
– Poorly reflecting surfaces
– Reflecting surfaces (glass, metal, etc.)
– Bright ambient light, such as direct sun light
** Under unfavourable conditions, e.g., for temperature
alterations, for a poorly reflecting surface or bright ambi-
ent light, the error of measurement can be up to 3 mm.
For working ranges in excess of 30 m, the accuracy
declines by 0.15 mm/m.
14
The device is intended for measuring distances
WDM 61
as well as for the calculation of areas and vol-
umes. The measured values determined by the
device may not be used to control or trigger
other equipment, machinery or systems. The
device is not suitable for operation in hazardous
areas.
For damage caused by usage other then
intended, the user is responsible.
<1mW
620 – 690 nm
0714 640 760
1 Laser, switched on
0.05 m – 60 m*
2 Measuring level (front/rear)
± 1.5 mm**
3 Information
1 mm
4 Min/max. indication
6/30 mm
5 Pythagoras
20 s/60 s/
6 Automatic release/timer
180 s
7 Area/volume
5 s – 60 s
8 Battey status display
9 Unit of measure
Micro/LR03
10 Displays for intermediate values
2 x 1.5 V
11 Main display
4 000 distance
measurements
IP 54
–25 ... +70 °C
12 On/Off switch, distance measurement,
±0 ... +40 °C
0.1 kg
13 Add button for calculations
14 Measuring Functions
15 Change measuring level
16 Minus button for calculations
17 Timer
18 Clear/off
19 Type plate

Use as Intended

Display Symbols

Keypad/Pushbuttons
tracking