Starting The Engine; Connecting To Earth; Environmental Protection - Black and Decker BD 2000i Traducción Del Manual Original

10. Air filter set
11. Engine switch
12. Pull cord
13. Oil filling jug
14. DC connecting cord
15. Spark plug wrench
16. Screw driver
17. Spark plug
18. Oil discharge pipes
6. Before Use.
6.1 Important: Electrical safety
- Electric supply cables and connected
equipment must be in perfect condition.
- The generator is to be operated only with
equipment whose voltage specifications
conform to the generator's output voltage.
- Never connect the generator to any other
power supply.
- Keep the cable length to the consumer as
short as possible.

6.2 Connecting to earth

-The housing is allowed to be connected to
earth in order to discharge static electricity.
To do this, connect one end of a cable to the
earth connection (7) on the generator and the
other end to an external earth (for example
an earth rod).

6.3 Environmental protection

- Dispose of soiled maintenance material
and operating materials at the appropriate
collection point.
- Recycle packaging material, metal and
plastics.
7. Operation.
7.1 Before starting the generator.
- You must fill up with engine oil (B7) and fuel
before you can start the engine.
- Check the fuel level and top it up if
necessary.
- Make sure that the generator has sufficient
ventilation.
- Make sure that the ignition cable is secured
to the spark plug.
- Inspect the immediate vicinity of the
generator.
- Disconnect any electrical equipment which may already been connected to the generator.
- Permissible ambient temperature – 10 to +
40°C, max. altitude above sea level 1000 m,
relative humidity:90 %(noncondensing)
- Never use the generator in dusty area.

7.2 Starting the engine

- Totally turn the Ventilating pole (1) to the
"OPEN" position clockwise.
Note: when transporting the engine, you
should turn the Ventilating pole (1) of the fuel
cap to the "OFF" position.
- Turn the Engine switch(11) of the engine to
the "ON" position
Important!
When starting with the pull cord, the motor
may recoil suddenly as it starts up, resulting
in hand injuries. Wear protective gloves when
starting the equipment.
7.3 Connecting equipment to the generator
- Connect the equipment you want to use to
the socket outlets (3/4)
Important!
- Never connect the generator to the
domestic power network as this may result
in damage to the generator itself or to other
electrical appliances in your home.
- Switch off the machine immediately and
contact your service station:
9