Siemens CDT3D Serie Guia De Inicio Rapido

s
Electronic Trip Unit - LCD
Déclencheur électronique á visualisation par LCD
Disparador por sobreintensidad electrónico con visualizador LCD
Installation Instructions / Instructivo de Instalación
Hazardous Voltage Hazardous Voltage
Will cause death or serious injury Will cause death or serious injury
Turn off and lock out all power supplying this device before Turn off and lock out all power supplying this device before
working on this device. working on this device.
Replace all covers before power supplying this device is Replace all covers before power supplying this device is
turned on. turned on.
Use only with Siemens certified Components.
Utilizar únicamente con componentes certificados de Siemens.
A utiliser uniquement avec les composants certifiés Siemens .
NOTE - These instructions do not purport to cover all
details or variations in equipment, or to provide for every
possible contingency to be met in connection with
installation, operation or maintenance. Should further
information be desired or should particular problems
arise, which are not covered sufficiently for the
purchaser's purposes, the matter should be referred to
the local Siemens sales office. The contents of this
instruction manual shall not become part of or modify
any prior or existing agreement, commitment or
relationship. The sales contract contains the entire
obligation of Siemens. The warranty contained in the
contract between the parties is the sole warranty of
Siemens. Any statements contained herein do not
create new warranties or modify the existing warranty.
Trademarks - Unless otherwise noted, all names
identified by ® are registered trademarks of Siemens
AG or Siemens Industry, Inc. The remaining trademarks
in this publication may be trademarks whose use by
third parties for their own purposes could violate the
rights of the owner.
Trip
[ Interrumpir ]
1
1
8 0 6 8 1 5 A 0 1
Tensión peligrosa. Tensión peligrosa.
Puede causar la muerte o lesiones graves. Puede causar la muerte o lesiones graves.
Desenergice totalmente antes de instalar o darle servicio. Desenergice totalmente antes de instalar o darle servicio.
Reemplace todas las barreras y cubiertas antes de Reemplace todas las barreras y cubiertas antes de
energizar el interruptor. energizar el interruptor.
2
U.S. Cat. No.
Item: CDT3D_ _ _
CDT3E_ _ _
CFT3D_ _ _
CFT3E_ _ _
Tension dangereuse. Tension dangereuse.
Danger de mort ou risque de blessures graves. Danger de mort ou risque de blessures graves.
Couper l'alimentation de l'appareil et barrer avant de Couper l'alimentation de l'appareil et barrer avant de
travailler. travailler.
Remplacez touts les couverts avant que Remplacez touts les couverts avant que
l'approvisionnement de pouvoir soit alimenté. l'approvisionnement de pouvoir soit alimenté.
Cal ISO 6789
EPSP18V
3VL90008AP01
OR
ELTPHB
3VL9000-8AK01
250A
178.4040.04
160A
178.4040.04
2
1 / 6
Euro Order No.
3VL92 _ _ - 6JH38
3VL92 _ _ - 6JM38
3VL93 _ _ - 6JH38
3VL93 _ _ - 6JM38
For Use With Frame DG, FG
Para Usar Con Caja Base DG, FG
11/32"
CDT3E060 3VL9206-6JM38
CDT3E100 3VL9210-6JM38
CDT3E150 3VL9215-6JM38
CFT3E100 3VL9310-6JM38
CFT3E150 3VL9315-6JM38
CFT3E250 3VL9325-6JM38
CDT3D060 3VL9206-6JH38
CDT3D100 3VL9210-6JH38
CDT3D150 3VL9215-6JH38
CFT3D100 3VL9310-6JH38
CFT3D150 3VL9315-6JH38
CFT3D250 3VL9325-6JH38
I.L. No. 806815A01
4 mm
6 mm