Clock Functions; How To Set: Clock Functions - AEG BEK431011M Manual De Instrucciones

8. CLOCK FUNCTIONS

8.1 Clock functions
Clock function
Time of Day
Duration
End Time
Time Delay
Minute Minder

8.2 How to set: Clock functions

How to set: Time of Day
- flashes when you connect the oven to the electrical supply, when there was a power cut or when the timer is
not set.
, - press to set the time.
After approximately 5 sec., the flashing stops and the display shows the time.
How to change: Time of Day
Step 1
- press repeatedly to change the time of day.
Step 2
, - press to set the time.
After approximately 5 sec., the flashing stops and the display shows the time.
How to set: Duration
Step 1 Set an oven function and the temperature.
Step 2
- press repeatedly.
Step 3
, - press to set the duration.
The display shows:
- flashes when the set time ends. The signal sounds and the oven turns off.
Step 4 Press any button to stop the signal.
Application
To set, change or check the time of day.
To set how long the oven works.
To set when the oven turns off.
To combine functions: Duration and End Time.
To set a countdown. This function has no effect on the operation of the
oven. You can set this function at any time, also when the oven is off.
- starts to flash.
.
- starts to flash.
ENGLISH 11