Symbol LS 7708 Guía De Referencia Rápida página 9

Detaching the Scanner from the Mounting Bracket
To detach the scanner:
1. Grasp the scanner firmly on both sides.
2. Squeeze the back of the scanner slightly while pushing the scanner in
the direction of the slot on the back.
3. Rotate the front of the scanner away from the mounting bracket until the
bracket pops out of the slot.
Scanning Bar Codes
Install and program the scanner. (Refer to the LS 7708 Product Reference Guide
for programming instructions.) For assistance, contact the local supplier or
Symbol Support Center (see back cover for Symbol Support Center phone
numbers).
For the best scanning performance, the counter top or surface area covered by
the active scan area should be free of any designs (e.g. stripes or patterns).
Ideally, that area should be a light, solid color. A rastering omni-directional
scan pattern provides rapid, orientation-free scanning.
To scan a bar code:
1. Ensure all cable connections are secure.
2. Orient the item with the bar code facing the scanner window.
3. Move the item through the active scan area in the direction of the
arrows, or place the item in front of the scanner.
4. Upon successful decode, the scanner beeps and the green LED flashes
momentarily.
9