LED Definitions
In addition to beeper sequences, the scanner communicates with the user via
an LED display. The Standard LED Definitions table defines LED indications
that display during scanning.
LED
Off
Green
Momentary flash
Slow continuous red flashing,
green on
Fast continuous red flashing,
green on
Green on (and laser blinking)
Red and green on
Maintenance
Cleaning the exit window is the only maintenance required. A dirty or
scratched window may affect scanning activity.
• Remove any dirt particles with a damp cloth.
• Wipe the window with a tissue moistened with ammonia or water.
Standard LED Definitions
No power is applied to the scanner.
The scanner is on and "ready to scan."
A bar code was successfully decoded.
The scanner is in programming mode.
There is an internal problem; the laser is shut off
for regulatory reasons.
Scanner is in Low Power Blink mode.
Scanner is in Low Power Motor and Laser
Shutdown mode.
Indication
13