8
LS 7708 Quick Reference Guide
3. Remove all rubber feet (from the bracket or from the scanner).
4. Place the mounting bracket in position over the drilled holes with its flat
surface facing the mounting surface.
5. Insert four screws through the holes and fasten to the mounting surface.
6. Align the slot at the back of the scanner with the plastic tab on the
mounting bracket.
7. Angle the scanner slightly to allow the bracket plastic tab to slide into
the slot.
8. Push the scanner towards the plastic tab and rotate it so that it is
perpendicular to the mounting surface.
9. Release the pressure on the scanner. The bracket locks into place.