Nikon SB-N10 Manual Del Usuario página 79

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 236
Optional SK-N10A Underwater Brackets
❚❚
Observe the following precautions when using an optional underwater
bracket:
• The SK-N10A is for use with the SB-N10 and WP-N1, WP-N2, and WP-N3
waterproof cases or SR-N10A underwater fi ber-optic cable adapters. At-
tach the equipment securely to the bracket to prevent damage and loss,
but do not use excessive force. Failure to observe this precaution could
damage the case, allowing water entry, or result in injury, malfunction,
or damage to the equipment.
• To prevent damage to or loss of items mounted on the bracket, tighten
lock screws immediately should they loosen during use.
• Keep lock screws free of sand, dust, and other foreign matter and choose
a sand- and dust-free location when attaching or removing items. Fail-
ure to observe this precaution could interfere with proper functioning
of the screws.
• Do not disassemble or modify. Failure to observe this precaution will
void the warranty and may cause result in water entry or damage to the
equipment. Repairs and internal inspection must be performed only by
Nikon-authorized service representatives.
• After use, remove the fl ash unit, fi ber-optic cable, and waterproof case
and rinse the bracket in fresh water.
• When lifting or transporting a waterproof case with the bracket at-
tached, pick the bracket up by the grip, not the stay. Failure to observe
this precaution could result in injury or damage to the equipment due
to falls or other accidents.
En
xiii
Tabla de contenido

Solución de problemas

loading

Tabla de contenido