Nikon SB-N10 Manual Del Usuario página 105

The J1, J2, J3, and S1
A
If you are using the unit with a J1, J2, J3, or S1, be sure to disable fl ash-
compensation support. If the fl ash-ready lamp is lit red, press the target-
ing lamp button until the fl ash-ready lamp lights blue (about three sec-
onds). The fl ash may fail to synchronize correctly if fl ash-compensation
support is enabled.
Flash-Compensation Support
A
When fl ash-compensation support is disabled, fl ash level can not be ad-
justed using the fl ash-level dial and the fl ash-ready lamp does not light
green after the fl ash fi res.
A Disabling the Flash
The fl ash can be disabled by rotating the mode dial to OFF and setting
the camera fl ash mode to
when the built-in fl ash for the J1 or J2 is raised).
s
(off ; but note that
s
can not be selected
En
25