Pre-Dive Preparation; The Pre-Dive Checklist - Nikon SB-N10 Manual Del Usuario

Pre-Dive Preparation

Pre-Dive Preparation
Before using the equipment underwater, check that the unit is
watertight and ready for use.

The Pre-Dive Checklist

The Pre-Dive Checklist
Check the following before taking the unit into the water:
En
 
Is the camera's built-in fl ash raised?
 
Is the equipment securely attached to the bracket (
 
Is the fi ber-optic cable securely connected (
 
Is the unit watertight? To ensure that the unit is watertight:
• Remove any sand, dust, hair, and other foreign matter from
the bottom and sides of the battery holder.
• Use a blower or cotton swab to remove any sand, dust, hair,
and foreign matter from inside the fl ash unit (when using
a cotton swab, be sure not to leave any threads behind).
• Check the O-ring for cracks and replace if necessary.
• Confi rm that the battery holder is
secured with the latch in the LOCK
position.
18
0
10, 14)?
0
12, 17)?