Worx WX252 Manual Original página 7

d) Remove any adjusting key
or wrench before turning the
power tool on. A wrench or a
key left attached to a rotating part
of the power tool may result in
personal injury.
e) Do not overreach. Keep proper
footing and balance at all
times. This enables better control
of the power tool in unexpected
situations.
f) Dress properly. Do not wear
loose clothing or jewellery.
Keep your hair, clothing and
gloves away from moving
parts. Loose clothes, jewellery or
long hair can be caught in moving
parts.
g) If devices are provided for the
connection of dust extraction
and collection facilities,
ensure these are connected
and properly used. Use of dust
collection can reduce dust-related
hazards.
h) Do not let familiarity gained
from frequent use of tools allow
you to become complacent and
ignore tool safety principles. A
careless action can cause severe injury
within a fraction of a second.
4) Power tool use and care
a) Do not force the power tool.
Use the correct power tool for
your application. The correct
power tool will do the job better
and safer at the rate for which it
was designed.
b) Do not use the power tool if
the switch does not turn it
on and off. Any power tool that
cannot be controlled with the
switch is dangerous and must be
repaired.
c) Disconnect the plug from
the power source and/or
the battery pack from the
power tool before making
any adjustments, changing
accessories, or storing power
tools. Such preventive safety
measures reduce the risk of starting
the power tool accidentally.
d) Store idle power tools out of
the reach of children and do
not allow persons unfamiliar
with the power tool or these
instructions to operate the
power tool. Power tools are
dangerous in the hands of
untrained users.
e) Maintain power tools. Check
for misalignment or binding
of moving parts, breakage of
parts and any other condition
that may affect the power
tool's operation. If damaged,
have the power tool repaired
before use. Many accidents
are caused by poorly maintained
power tools.
f) Keep cutting tools sharp and
clean. Properly maintained cutting
tools with sharp cutting edges are
less likely to bind and are easier to
control.
g) Use the power tool,
accessories and tool bits
etc. in accordance with
these instructions, taking
into account the working
conditions and the work to
be performed. Use of the power
tool for operations different from
those intended could result in a
hazardous situation.
h) Keep handles and grasping
surfaces dry, clean and free
from oil and grease. Slippery
handles and grasping surfaces do
not allow for safe handling and
control of the tool in unexpected
situations.
5) Battery tool use and care
a) Recharge only with the charger
specified by the manufacturer.
A charger that is suitable for one
type of battery pack may create a
risk of fire when used with another
battery pack.
b) Use power tools only with
specifically designated battery
EN
7