Various Functions; Automatic Operation - Hitachi RAK-18PPA Manual De Instrucciones

VARIOUS FUNCTIONS

■ Auto Restart Control
If there is a power failure, operation will be automatically restarted when the power is resumed with previous operation
●
mode and airflow direction.
(As the operation is not stopped by remote controller.)
If you intend not to continue the operation when the power is resumed, switch off the power supply.
●
When you switch on the circuit breaker, the operation will be automatically restarted with previous operation mode
and air flow direction.
Note: 1. If you do not require Auto Restart Control, please consult your sales agent.
2. Auto Restart Control is not available when Timer or Sleep Timer mode is set.

AUTOMATIC OPERATION

The device will automatically determine the mode of operation, HEAT or COOL depending on the current
room temperature. The selected mode of operation will change when the room temperature varies.
However, the mode of operation will not change when indoor unit is connected to multi type outdoor unit.
Press the MODE selector button so that the display indicates the
(AUTO) mode of operation.
● When AUTO has been selected, the device will automatically
1
determine the mode of operation, HEAT or COOL depending on
the current room temperature. However the mode of operation will
not change when indoor unit is connected to multi type outdoor
unit.
● If the mode automatically selected by the unit is not satisfactory,
manually change the mode setting (HEAT, DEHUMIDIFY, COOL
or FAN).
Set the desired FAN SPEED with the
display indicates the setting).
(AUTO)
2
Set the desired room temperature with the TEMPERATURE buttons
3
(the display indicates the setting).
The temperature setting and the actual room temperature may vary
depending on conditions.
Press the (START/STOP) button.
START
Operation starts with a beep.
STOP
Press the button again to stop operation.
■ As the settings are stored in the memory
only have to press the
Press the (FAN SPEED) button to select AUTO, HI, MED, LOW or
SILENT.
– 10 –
– 10 –
(FAN SPEED) button (the
(HIGH)
(SILENT) (LOW)
of the remote controller, you
(START/STOP) button next time.
(MED)