Technical Parameters; Environment Protection - GRAPHITE 58G862 Instrucciones De Uso

ADDITIONAL HINTS FOR USING HAMMER DRILL
To achieve the best possible efficiency when working on concrete, apply moderate (not excessive) pressure
on the hammer drill. Excessive pressure leads to efficiency loss. Hammer drill filled with solid grease requires
some time to heat up, depending on the ambient temperature. New hammer drill requires some time to
work before it achieves full working efficiency.
All faults should be repaired by service workshop authorized by the manufacturer.
RATED PARAMETERS
Parameter
Rated voltage
Input current frequency
Rated power
No load rotational speed
Chuck
Maximum drilling
diameter
Impact energy
Impact rate
Protection class
Weight
Year of production
NOISE LEVEL AND VIBRATION PARAMETERS
Sound pressure: Lp = 96 dB(A) K = 3 dB(A)
A
Sound power: Lw = 107 dB(A) K = 3 dB(A)
A
Vibration acceleration (front handle) a
Vibration acceleration (rear handle) a
Do not dispose of electrically powered products with household wastes, they should be utilized
in proper plants. Obtain information on wastes utilization from your seller or local authorities.
Used up electric and electronic equipment contains substances active in natural environment.
Unrecycled equipment constitutes a potential risk for environment and human health.
* Right to introduce changes is reserved.
"Grupa Topex Spółka z ograniczoną odpowiedzialnością" Spółka komandytowa with seat in Warsaw at ul. Pograniczna
2/4 (hereinafter Grupa Topex) informs, that all copyrights to this instruction (hereinafter Instruction), including, but not
limited to, text, photographies, schemes, drawings and layout of the instruction, belong to Grupa Topex exclusively and
are protected by laws accordingly to Copyright and Related Rights Act of 4 February 2004 (ustawa o prawie autorskim
i prawach pokrewnych, Dz. U. 2006 No 90 item 631 with later ammendments). Copying, processing, publishing,
modifications for commercial purposes of the entire Instruction or its parts without written permission of Grupa Topex
are strictly forbidden and may cause civil and legal liability.

TECHNICAL PARAMETERS

Hammer Drill
concrete
steel
wood
= 9,64 m/s 2 K = 1,5 m/s
h
2
= 16,573 m/s K = 1,5 m/s
h

ENVIRONMENT PROTECTION

16
Value
230 V AC
50 Hz
1500 W
750 rpm
SDS-PLUS
36 mm
13 mm
40 mm
4,5 J
3200 min -1
II
6,03 kg
2016
2
2