Tabla de contenido
REPLACEMENT OF CARBON BRUSHES
Replace immediately used up (shorter than 5 mm), burnt or cracked motor carbon brushes. Always
replace both brushes at a time.
Entrust replacement of carbon brushes only to a qualified person. Only original parts should be
used.
All faults should be repaired by service workshop authorized by the manufacturer.
RATED PARAMETERS
Parameter
Supply voltage
Current frequency
Rated power
No load rotational speed
Clamping range
Spindle thread
Maximum drilling diameter
Strokes per minute
Protection class
Weight
Year of production
NOISE LEVEL AND VIBRATION PARAMETERS
Sound pressure: Lp
= 102,12 dB(A) K = 3 dB(A)
A
Sound power: Lw
= 113 dB(A) K = 3 dB(A)
A
Vibration acceleration: a
h
Do not dispose of electrically powered products with household wastes, they should be utilized in proper plants. Obtain
information on wastes utilization from your seller or local authorities. Used up electric and electronic equipment contains
substances active in natural environment. Unrecycled equipment constitutes a potential risk for environment and human
health.
* Right to introduce changes is reserved.
"Grupa Topex Spółka z ograniczoną odpowiedzialnością" Spółka komandytowa with seat in Warsaw at ul. Pograniczna 2/4 (hereinafter Grupa
Topex) informs, that all copyrights to this instruction (hereinafter Instruction), including, but not limited to, text, photographies, schemes,
drawings and layout of the instruction, belong to Grupa Topex exclusively and are protected by laws accordingly to Copyright and Related
Rights Act of 4 February 2004 (ustawa o prawie autorskim i prawach pokrewnych, Dz. U. 2006 No 90 item 631 with later ammendments).
Copying, processing, publishing, modifications for commercial purposes of the entire Instruction or its parts without written permission of
Grupa Topex are strictly forbidden and may cause civil and legal liability.
TECHNICAL PARAMETERS
Drill
gear I
gear II
steel
wood
concrete
gear I
gear II
= 24,527 m/s
2
K = 1,5 m/s
ENVIRONMENT PROTECTION
Value
230 V AC
50 Hz
810 W
0 – 1200 rpm
0 – 2800 rpm
1,5 - 13 mm
1/2" x 20 mm
13 mm
40 mm
16 mm
0 - 19200 spm
0 – 44800 spm
2,7 kg
2014
2
13
II
Tabla de contenido
