Connecting The Interceptor Appliance To Your Network - Riverbed Steelhead CX Guía Rápida De Instalación

Installing the Interceptor Appliance

6. Connecting the Interceptor Appliance to Your Network

Plug a straight-through cable into the Primary port of the Interceptor appliance and the LAN switch.

This can be any port on your LAN switch which is configured to connect to a host.
Plug a straight-through cable into the LAN port of the Interceptor appliance and the LAN switch. This

can be any port on your LAN switch which is configured to connect to a host.
Plug the cross-over cable into the WAN port of the Interceptor appliance and the WAN router.

146
Installing the Interceptor Appliance
Getting Started Guide