Process Data Structure; Troubleshooting - SICK RAY10 Instrucciones De Operación

8

Process data structure

9

Troubleshooting

8022198.1BXN / 2021-05-26 | SICK
Subject to change without notice
IO-Link
Process data
Bit 0 / Data type
Bit 1 / Data type
Bit 2 ... 15 / Description / Data type
The Troubleshooting table indicates measures to be taken if the sensor stops working.
Table 20: Troubleshooting
LED/fault pattern
Yellow LED does not light up
even though the light beam
is aligned to the reflector and
there is no object in the path of
the beam
Green LED flashes
Switching outputs do not
behave in accordance with
table 5
The blue LEDs are very close
together
Yellow LED flashes
PROCESS DATA STRUCTURE
Cause
No voltage or voltage below
the limit values
Voltage interruptions
Sensor is faulty
IO-Link communication
IO-Link communication
Change of the configuration
Short-circuit
Front screen and/or reflector
is contaminated.
Distance between sensor
and reflector is too large /
light beam is not completely
aligned to the reflector /
O P E R A T I N G I N S T R U C T I O N S | RAY10
A new teach of RAY10 is
not required.
RAY10-xxxxxxA00
V1.1
2 byte
Byte 0: bits 15... 8
Byte 1: bits 7... 0
Q / Boolean
L1
Q / Boolean
L2
[empty]
Measures
Check the power supply,
check all electrical connec‐
tions (cables and plug connec‐
tions)
Ensure there is a stable power
supply without interruptions
If the power supply is OK,
replace the sensor
-
None
Adjustment of the configura‐
tion
Check electrical connections
Cleaning of the optical surfa‐
ces (sensor and reflector).
Check the operating condi‐
tions: Fully align the beam
of light (light spot) with the
reflector. / Clean the optical
8
en
31