Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 14

English

Use the roto food cutter to slice and
to assemble your
shred such foods as carrot,
roto food cutter
cucumber, cabbage, apples, potato
and cheese.
assembly
before using your Kenwood
1 Select a drum. The drums are
attachment
numbered at the back and used as
G
Read these instructions carefully and
follows:
retain for future reference.
Drum No 1 - For fine shredding :-
G
Remove all packaging.
G
chocolate, nuts, carrot and cheese.
G
Drum No 2 - For coarse
safety
shredding :- chocolate, nuts, carrot
and cheese.
Never put your fingers in the feed
G
Drum No 3 - For thin slicing :-
G
tube. Only use the pusher supplied
onion, cabbage, cucumber, carrot,
with the roto food cutter attachment.
apples and potato.
G
Do not use excessive force to push
G
Drum No 4 - For thick slicing :-
the food down the feed tube - you
onion, cabbage, cucumber, carrot,
could damage your attachment.
apples, potato and beetroot.
Handle the drums with care, they are
G
extremely sharp.
2 Fit the drum into the body of the
G
Do not touch moving parts.
roto food cutter.
G
Always unplug the appliance before
3 Lock the drum retainer in position by
fitting or removing parts before
turning anti-clockwise until the
attempting to clear jammed food or
locating line is directly underneath
cleaning.
the line on the body
to use your
Refer to your main meat grinder
instruction book for additional safety
roto food cutter
warnings.
1 Release the locking screw on the
This appliance conforms to EC
G
meat grinder by turning
directive 2004/108/EC on
anticlockwise
Electromagnetic Compatibility and
attachment into the outlet
EC regulation no. 1935/2004 of
2 Turn it both ways until it locks into
27/10/2004 on materials intended
place. Then turn the locking screw
for contact with food.
clockwise to secure.
before using for the first time
3 Place a collecting vessel beneath the
1 Wash the parts: see 'Cleaning'.
outlet.
4 Fill the feed tube to prevent food
key
from slipping sideways during
processing. If necessary trim larger
pusher
items to fit. Switch on and gently
feed tube and body
push down with the pusher. Note:
drum retainer
The pusher will fit two ways, front
drums
and back.
2
.
, then slide the
.
Tabla de contenido
loading

Tabla de contenido