GRAPHITE 58G014 Manual De Instrucciones página 15

Graphite Energy+ System Battery
Parameter
Battery
Battery voltage
Battery type
Battery capacity
Ambient temperature range
Charging time for charger 58G002
Weight
Year of production
Graphite Energy+ System Charger
Parameter
Charger type
Supply voltage
Power supply frequency
Charging voltage
Max. charging current
Ambient temperature range
Charging time of the battery 58G001
Charging time of the battery 58G004
Protection class
Weight
Year of production
NOISE LEVEL AND VIBRATION PARAMETERS
Noise and vibration information
Parameters of produced noise level, such as sound pressure level
Lp and sound power level Lw
A A
are specified below in this manual, in compliance with EN 60745.
Vibration values a and measurement uncertainty K are
h
determined in accordance with EN 60745-2-1 and specified
below.
Vibration level specified below in this manual was measured in
accordance with measurement procedure defined in EN 60745
and can be used to compare power tools. It can also be used for
initial assessment of exposure to vibrations.
Specified vibration level is representative for main applications
of the power tool. Vibration level may change if the power tool is
used for other purposes, with different working tools or will not
be maintained properly. The abovementioned factors may lead
to higher exposure to vibrations during whole working time.
To precisely define exposure to vibrations, include periods when
the power tool is switched off and when it is switched on but
not used for working. This way total exposure to vibrations may
be significantly lower. Use additional safety measures to protect
the user against results of exposure to vibrations, such as: power
tool and working tool maintenance, proper hand temperature
conditions, good work organisation.
Sound pressure level: Lp = 80,2 dB (A) K=3dB (A)
A
Sound power level: Lw =91,2 dB (A) K=3dB (A)
A
Vibration acceleration value:
a = 7,521 m/s K= 1,5 m/s
2 2
h
Value
58G001 58G004
18 V DC 18 V DC
Li-Ion Li-Ion
2000 mAh 4000 mAh
4 C – 40 C 4 C – 40 C
0 0 0 0
1 h 2 h
0,400 kg 0,650 kg
2020 2020
Value
58G002
230 V AC
50 Hz
22 V DC
2300 mA
4 0 C – 40 0 C
1 h
2 h
II
0,300 kg
2020
with measurement uncertainty K
ENVIRONMENTAL PROTECTION
Electrical equipment must not be disposed off
with household waste and, instead, should be
utilized at appropriate facilities. Information
on utilization can be provided by the product
vendor or the local authorities. Waste electrical
and electronic equipment contains substances
that are not neutral to the natural environment.
Equipment that is not recycled constitutes a
potential hazard to the environment and to
human health.
Storage batteries/batteries must not be disposed
with domestic waste, put in a fire or into the
water. Damaged or used up storage batteries
must be properly recycled in compliance with the
current directive pertaining to disposal of storage
batteries and batteries.
Li-Ion
* Right to introduce changes is reserved.
"Grupa Topex Spółka z
komandytowa with seat in Warsaw at ul. Pograniczna 2/4 (hereinafter Grupa
Topex) informs, that all copyrights to this instruction (hereinafter Instruction),
including, but not limited to, text, photographies, schemes, drawings
and layout of the instruction, belong to Grupa Topex exclusively and are
protected by laws accordingly to Copyright and Related Rights Act of 4
February 2004 (ustawa o prawie autorskim i prawach pokrewnych, Dz. U. 2006
No 90 item 631 with later ammendments). Copying, processing, publishing,
modifications for commercial purposes of the entire Instruction or its parts
without written permission of Grupa Topex are strictly forbidden and may
cause civil and legal liability.
ÜBERSETZUNG DER
ORIGINALBETRIEBSANLEITUNG
AKKU-EXZENTERSCHLEIFER
58G014
ANMERKUNG: LESEN SIE DIE VORLIEGENDE BETRIEBSANLEITUNG
VOR DER INBETRIEBNAHME
SORGFÄLTIG DURCH UND BEWAHREN SIE DIESE FÜR SPÄTERES
NACHSCHLAGEN AUF.
DETAILLIERTE SICHERHEITSVORSCHRIFTEN
SPEZIELLE VORSCHRIFTEN
EXZENTERSCHLEIFERS
Beim Schleifen von Holz- und Metalloberflächen, die beispielsweise
mit den bleihaltigen Farben beschichtet werden, können schädliche/
toxische Stäube entstehen. Durch den Kontakt oder das Einatmen
solcher Stäube kann die Gesundheit des Bedieners oder Dritter
gefährdet werden. Folgende persönliche Schutzausrüstung ist zu
verwenden: Halbfiltermasken, Schutzbrillen. Die Staubabzugsanlage
ist anzuschließen.
VOR DEM BETRIEB DES SCHLEIFERS
• Der Schleifer ist beim Betrieb fest, mit beiden Händen zu halten.
• Prüfen Sie vor dem Einschalten des Schleifers, ob sie mit dem
Schleifpapier den zu bearbeitenden Stoff nicht berührt.
• Vor dem Betätigen des Schleifers prüfen Sie, ob das Schleifpapier
richtig befestigt ist.
• Berühren Sie keine beweglichen Teile des Schleifers.
• Legen Sie den Schleifer nach dem Ausschalten erst ab, wenn seine
beweglichen Teile völlig zum Stillstand gekommen sind.
15
ograniczoną odpowiedzialnością"
DIESES ELEKTROWERKZEUGS
ZUM SICHEREN BETRIEB
Spółka
DES