Mode Button - HoMedics FMS-352HJ-BL Manual De Instrucciones E Información De Garantía

INSTRUCTIONS FOR USE
To reduce the risk of electric shock, this unit is equipped with a polarized plug (one blade
wider than the other). This plug will fit in a polarized outlet only one way. If the plug
does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified
electrician to install the proper outlet. Do not change the plug in any way.
1. Plug into a 120-volt outlet.
2. It is highly recommended that you wear socks while using this foot massager. Do not use
Fig. 1
the unit with shoes.
3. Place massager on the floor in front of your chair or seat and place feet in massager.
4. For your convenience, a wireless remote control is included. You can use the buttons on the
remote control or the corresponding buttons on the massager with the touch of your toe
to activate and customize your massage. The buttons on the massager will illuminate to
confirm your selection.
5. To activate massage, press the power
will illuminate white to confirm your selection. The unit will start with both air and knead
at low intensity.

MODE BUTTON

1. Pressing the "MODE"
Fig. 2
Both sides of the "MODE"
2. Pressing the "MODE"
"MODE"
3. Pressing the "MODE"
side of the "MODE"
4. Pressing the "MODE"
intensity, "MODE," and "KNEAD" intensity buttons will all be illuminated.
NOTE: You can adjust the intensity of air or kneading by pressing the "AIR"/"KNEAD"
AIR INTENSITY BUTTON
1. Pressing the "AIR" intensity
Fig. 3
pressure, or how firmly it squeezes your feet. (Fig. 3).
2. When first turned on, air intensity will begin in the lowest setting, with the
illuminated dull green.
3. Pressing the
green.
4. Pressing the
brightest green.
5. Pressing the
button starts the unit with both air and knead in low intensity.
button will be illuminated (Fig. 2).
button again will change the unit to air only. The right side of the
button will illuminate green.
button a second time will change the unit to knead only. The left
button will illuminate blue.
button once more will return the unit to air and knead. "AIR"
button will allow you to adjust the intensity of the air
button again will change the foot pressure to medium, indicated by a brighter
button a third time will change the pressure to high, indicated by the
button once more will return the pressure to its lowest setting.
4
button. The power button on the massager
button.
button