Attaching The Fan Blades - HAMPTON BAY 52144 Guía De Uso Y Mantenimiento

Assembly - Attaching the Blades (continued)
2

Attaching the fan blades

NOTE: This fan features Quick Install
blade installation.
□
Mount the fan blade (H) to the blade bracket (I) by aligning the
three key-slot holes in the blade (H) with the three posts on
the top of the blade brackets (I).
□
Hold the blade (H) close to the blade bracket (I) and press the
blade (H) down firmly. Ensure the key-slot holes are properly
seated on the blade arm posts.
□
While still holding the blade (H) down, firmly slide the blade (H)
away from the bracket (I) side until the blade (H) engages in
the locking mechanism.
□
Make sure the locking mechanism at the rear of the blade
bracket (I) springs upward and butts against the edge of the
blade (H) indicating a secure connection.
□
Visually inspect the top of the blade bracket (I) to ensure the
locking mechanism is securely in place.
□
Repeat for the remaining blades (H).
Assembly - Attaching the Light Kit
1
Attaching the light kit
CAUTION: To reduce the risk of electric shock, disconnect
the electrical supply circuit to the fan before installing.
□
Remove and save the three screws (QQ) from the light kit
fitter assembly (F).
□
Connect the wires exiting the bottom of the motor assembly (E)
by connecting the molded adaptor plugs together (blue to blue,
white to white).
□
Slide the light kit (F) into the switch housing and secure it using
the three screws (QQ) that were removed in the first step.
blades for fast and easy
TM
12
H
I
E
QQ
F