Operating Your Fan; Using The Remote Control - HAMPTON BAY 52144 Guía De Uso Y Mantenimiento

Operating Your Fan

Your fan is equipped with a remote control to operate the fan speed
and lights of your new ceiling fan.
The appropriate speed settings for warm or cool weather depends on
factors such as the room size, ceiling height, and number of fans.
The fan is shipped from the factory with the reversing switch
positioned to circulate air downward. If airflow is desired in the
opposite direction, turn your fan off and wait for the blades to stop
turning, then slide the reversing switch (XX) (located in switch cup) to
the opposite position, and turn the fan on again. The fan blades will
turn in the opposite direction and reverse airflow.
NOTE: Wait for the fan to stop before reversing the direction of
the blade rotation.
Warm weather - (Forward) A downward airflow creates a cooling effect.
This allows you to set your air conditioner on a warmer setting without
affecting your comfort.
Cool weather - (Reverse) An upward airflow moves warm air off of the
ceiling. This allows you to set your heating unit on a lower setting
without affecting your comfort.

USING THE REMOTE CONTROL

1. Power ON/OFF. - Press and release the
fan and light on or off.
□
Press and hold the
away time delay"; this will activate the light for 30 seconds (the
light will be activated at 50% brightness).
2. Fan Speed - LEDs on the fan speed button will illuminate to
the corresponding speed.
- Press and release 1 time - turns the fan on high speed.
- Press and release 2 times - turns the fan on medium speed.
- Press and release 3 times - turns the fan on low speed.
3. Light ON/OFF
□
Press and release the
□
Press and hold the
(as long as you have NOT previously set O/D dip switch in your
remote to the "ON" position).
button to turn the
button for 5 seconds to use the "walk
button to turn the light on or off.
button to activate the dimmer function
14
A. Warm weather
B. Cool weather
Power ON/OFF
Fan speed
Light ON/OFF
& dimmer function
K