Hanging The Fan; Attaching The Canopy - HAMPTON BAY 52869 Guía De Uso Y Mantenimiento

Assembly - Hanging the Fan (continued)
6

Hanging the fan

WARNING: When using the standard ball/downrod mounting, the
tab in the ring at the bottom of the mounting bracket must rest in
the groove of the hanger ball. Failure to properly seat the tab in
the groove could cause damage to the wiring.
□
Carefully lift the fan motor assembly (G) up to the mounting
bracket (A).
□
Seat the hanger ball portion of the ball/downrod assembly (B)
in the mounting bracket socket. Ensure that the tab on the
mounting bracket (A) socket is properly seated in the groove
in the hanger ball (B).
8

Attaching the canopy

□
Align the locking slots of the ceiling canopy (C) with the two
screws in the mounting bracket (A). Push up to engage the
slots, and turn clockwise to lock the canopy (C) in place.
□
Firmly tighten the two mounting screws (BB) with lock washer
(CC).
□
Install the remaining two mounting screws (BB) into the holes
in the canopy (C) and tighten firmly.
7
Connecting the safety cable
□
Turn the wood screw (AA) into the ceiling.
□
Place the looped end of the safety cable (K) onto the wood
screw (AA) and then tighten the screw firmly, or connect the
safety cable directly to the outer joist or mounting bracket (A).
9
Please contact 1-877-527-0313 for further assistance.
HAMPTONBAY.COM