Tabla de contenido
Idiomas disponibles
Idiomas disponibles
6. Logout
Logout:
Closes the active user's session. To continue managing the system is necessary
to enter the password again.
Shutdown:
Turn off the DVR. After choosing this option you must press the on/off switch
which is on the back.
Reboot:
Restart the DVR.
INSTALLATION AND USE OF A PTZ CAMERA
Connect PT or PTZ cameras
Important before you begin:
- Press the lock of this port with the help of a
screwdriver to connect and secure the RS485 cables
cameras.
- RS485 cables PT or PTZ camera are those that
allow the communication of the DVR. The positive (+)
is generally stamped purple color and the negative (-).
For more information, see the specifications for your
camera.
1. Insert the RS485 cables to camera +485 and -485
inputs on the rear panel of the DVR, in accordance
with the polarity.
2. Connect the cable from the camera to the channel
you selected in step 1 of the "PT or PTZ camera
settings" instructions. If necessary, use an adapter
with RCA female connector to BNC male connector.
3. Insert the adaptor to the connector of the camera
to energize it.
43
43
Tabla de contenido
